Deluxe MRI Non-Magnetic Non-Sparking Maintenance Tool Kit
OUR NEW DELUXE MRI TOOL KIT ROCKS!
As shaggy-haired Sammy Hagar sang for legendary Van Halen back in the 80s, if we could have the Best of Both Worlds it would be a badass non sparking, non magnetic Metric and SAE MRI tool kit from Tecra Tools.
Okay, so maybe Sammy didn’t sing the part about the tool kit from Tecra but he was right about the best of both and he probably knew this kit would someday be a reality! Prescient, Sammy.
Yep, the Best of Both Worlds... Do you find yourself needing SAE and Metric non-ferrous/non-sparking tools? Don't buy two separate kits when our Deluxe MRI tool kit contains BOTH SAE & Metric tools in ONE EASY KIT with no duplication. All 54 non-magnetic, non-sparking tools are bedded in custom tool control foam which provides tool protection, easy tool identification and immediate tool inventory.
With this kit you'll be ready to safely tackle any job requiring work on or near MRI systems. Our Non-Sparking, Non-Magnetic 3T (3-Tesla Safe), Corrosive Resistant tool kit comes neatly packaged in a hard sided waterproof, rustproof tool case with a three layer custom foam tool controlled interior. This 54-piece tool kit features a variety of combination wrenches, two adjustable wrenches and hex key sets. The kit also contains a full set of screwdrivers and a selection of the most commonly used pliers and cutters.
Safe for use on GE, Siemens and Philips MRI equipment.
This kit is also perfect for Non-Sparking Field Service applications in: Military, Aerospace, Mining, Industrial, Fire Departments, and Utilities.
If you can't find the exact tool kit to fit your needs then by all means build your own at Custom Tool Kits.
- Non-Magnetic - These tools are tested and meet the requirements set forth by the United States Government for Non-Magnetic Hand Tools as defined by MIL-I-17214, are 3-Tesla (3T) safe, and conform to ASTM F2503-05. This enables this tool kit to be used near sensitive magnetic equipment and in clean room environments.
- Non-Sparking - Approved as Non-Sparking by the Factory Mutual Research Corporation. Ideal for working around hazardous, flammable or combustible vapors, liquids, dusts or residues.
- Hand Tool Limited Lifetime Warranty - If tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.
- Tool Case Unconditional Lifetime Guarantee - Watertight, Dust Proof, and Auto Purge System.
- Custom Tool Control Foam Interior - Protects your investment by reducing the potential of tools being left in the work area or damaged due to improper storage. Tools can also be easily located to complete a job faster.
- 8mm Combo Wrench
- 9mm Combo Wrench
- 10mm Combo Wrench
- 11mm Combo Wrench
- 12mm Combo Wrench
- 13mm Combo Wrench
- 14mm Combo Wrench
- 15mm Combo Wrench
- 17mm Combo Wrench
- 19mm Combo Wrench
- 21mm Combo Wrench
- 22mm Combo Wrench
- 24mm Combo Wrench
- 6" Rule, Inch/Metric Pla
- 10pc Hex Key Set SAE
- 10pc Hex Key Set Metric
- 8" Slip Joint Pliers
- 12" Pump Pliers
- 7" Long Nose Pliers w/cutter
- 7" Diagonal Cutters
- #2 Phillips Screwdriver
- #1 Phillips Screwdriver
- #3 Phillips Screwdriver
- 5/32" Slotted Screwdriver
- 1/4" Slotted Screwdriver
- 7/16" Slotted Screwdriver
- 3/8" Slotted Screwdriver
- 3/8" Combo Wrench
- 7/16" Combo Wrench
- 1/2" Combo Wrench
- 9/16" Combo Wrench
- 5/8" Combo Wrench
- 3/4" Combo Wrench
- 8" Adj Wrench
- 12" Adj Wrench
- 6mmx7mm Open End Wrench
- Custom Tool Control Foam Sets
- Impact Resistant & Waterproof Hard Sided Tool Case
