Telecom Tools - Hand Tools

Detailed listing of our hand tools.

5-in-1 UR, UY, UG Connector Crimping Pliers
  • Price: $17.50
    SKU: 12202
    Weight: 0.3 lbs.
    Brand: Jonard
  • $17.50 qty:

Five-in-one design combines needle nose pliers, wirestripper, insulation crusher, and side cutter with a 3M Scotchlok “Beanie” splice connector crimper.

This quality telecom plier combines five tools in one. It includes a crimper nest for 3M Scotchlok UR/UY/UG connectors, AMP tel splice connectors, 709 series connectors, and crimping "B" type splice connectors.

In addition to the crimper nest this tool adds a long nose plier tip plus a crusher, cutter, a .030" (22 AWG) stripping hole and yellow plastic handle for grip and comfort. Overall length 6-7/8".

Lineman's B Wrench
  • Price: $34.75
    SKU: 18600
    Weight: 1.8 lbs.
    Brand: Jonard
  • $34.75 qty:

Forged and heat treated, this wrench is used on pole line hardware.

It is open-end, double-end type with two sizes of openings at each end and an oval hole for turning pole steps. The end openings accommodate nuts for 3/8", 1/2", 5/8" and 3/4" bolts and the head of the 1/2" drive screw. The faces of the wrench openings are offset to provide handle clearance.
Fuse Puller
  • Price: $11.75
    SKU: 22160
    Weight: 0.1 lbs.
    Brand: Ideal
  • $11.75 qty:

Designed for use with small, cartridge-type fuses (9/32" to 1/2" dia.; 0 to 30 amps).

This handy and convenient fuse puller is made of fully insulated, reinforced, high-dielectric engineering plastic and is glass filled polypropylene constructed. Moisture-resistant and will not warp. Bright yellow color with amperage ranges clearly marked. This quality tool is 5" in overall length.
Can Wrench / Stripper
  • Price: $20.65
    SKU: 43198
    Weight: 0.5 lbs.
    Brand: Jonard Tools
  • $20.65 qty:

Combination can wrench and stripper from Jonard.

This durable 2-in-1 shock-resistant tool has 3/8 inch and 7/16 inch hex sockets for accessing panels and doubles as a wire stripper for 22/4 telephone wire. It also strips PVC insulation and AWG 22 wire insulation.
Multi-Socket Can Wrench
  • Price: $49.25
    SKU: 43199
    Weight: 0.5 lbs.
    Brand: Ripley
  • $49.25 qty:

6-in-1 Multi-Socket Can Wrench

Don�t carry five sizes of nutdriver and a separate booth wrench when this 6-in-1 Can Wrench does it all! Replaces the need to carry five separate nut drivers. Wrench is supplied with hex sockets 1/2", 7/16", 3/8", 5/16", 1/4" and a 5/32" Security Hex tip (booth wrench). Impact resistant polymer handle also provides a storage compartment for unused sockets. Wrench has reversible double sockets on each end.
Security Booth Wrench
  • Price: $6.00
    SKU: 17295
    Weight: 0.1 lbs.
    Brand: Jonard
  • $6.00 qty:

Security wrench for 5/32" hex pin-in-head security fasteners which are common in locking mechanisms on pre-wire terminal boxes for telephone and cable TV applications.

Security wrench shaft is 5.5" in length, total tool length is 9".
Probe Pic
  • Price: $11.25
    SKU: 15323
    Weight: 0.1 lbs.
    Brand: Fluke Networks
  • $11.25 qty:

The Probe Pic is a handy, pocket-sized insulated probe that can be used to check for loose or damaged connections, or to spread apart wires for direct access.

Use the metal pic end for tracing or pulling wires from a bunch, or picking one wire off a flat surface. Overall length is 5.5".
Spudger
  • Price: $2.00
    SKU: 15325
    Weight: 0.1 lbs.
    Brand: Monarch
  • $2.00 qty:

Flat-notched end of spudger removes solder from terminal blocks and positions wire while hook end picks up, separates or removes single wires from the maze.

Spudger is 6.7” in length.
Wire Prober
  • Price: $1.00
    SKU: 15321
    Weight: 0.1 lbs.
    Brand: IV Products
  • $1.00 qty:

Tough resilient nylon insulating probe "spudger".

Molded hook on one end for pulling, pushing and twisting. This probe pick is 5.75" in length.
Lamp Extractor
  • Price: $15.75
    SKU: 22171
    Weight: 0.1 lbs.
    Brand: Jonard
  • $15.75 qty:

Unique and useful tool for removing miniature LED lamps with bayonet-type bases.

Mechanical type extractor used to remove or insert miniature lamps in panels and switchboards by firmly and gently grasping lamps. Grasp is limited to 3/8" to prevent shorts.

BUILD YOUR OWN TOOL KIT

Get exactly what you need with a custom tool kit from Tecra Tools.

Call us toll-free
800.284.0808

Subscribe to our Tec-Alert Email Newsletter

Get tips & information for field service and MRO professionals.

* indicates required

Extraordinary Service
Commitment to quality
100% sastisfaction guarantee