Fluke FEV100 Electric Vehicle Charging Station EVSE Tester
Conveniently test the function and safety of electric vehicle charging stations with this charging station adapter that comes complete with a type 1 connector and cable. While simulating the presence of an electric vehicle, this adapter performs a variety of tests and provides easy performance and maintenance testing.
Test the safety and performance of a type 1, level 1 or level 2 electric vehicle ac charging stations (EVSEs) with the Fluke FEV100. This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with appropriate test instruments such as a digital multimeter or oscilloscope. Use the FEV100 to verify an EVSE is working properly after install and during periodic maintenance, or troubleshoot an EVSE if it is not delivering the appropriate charge.
* PTIA 2021 Test & Measurement Award Winner *
EVSE charging cables may become damaged over the course of use, increasing electric shock risks to users. Stay protected from and check risk of electric shock with the GFCI trip test. This function verifies the breaker of the EVSE is connected by detecting ground faults. Additionally, the PE grounding protection pre-test verifies that there is no presence of dangerous voltage at the ground terminal.
Simplicity and Convenience
Perform a variety of tests including ground fault checks, insulation of wires, measuring voltage and duty cycle to see max current available for charging all in one adapter that safely integrates with the Fluke portfolio of test and measurement tools. There is no need to bring an electric vehicle onsite for EVSE troubleshooting: the adapter acts as an electric vehicle when connected to an EVSE for easy performance and maintenance testing.
What's included with the Fluke FEV100
• Fluke FEV100/BASIC Test Adapter
• Fluke FEV-COM/TY1 Type 1 Connector & Cable
• Soft Carrying Case
• User Manual
• 3-year warranty
- VEHICLE SIMULATION: CP Control Pilot state simulation tests different charging states
- GROUNDING PROTECTION: PE Pre-Test for dangerous voltage
- GFCI TESTING: Stay protected from and check risk of electric shock
- COMPATIBILITY: Integrates into Fluke portfolio of test and measurement tools
- SAE J1772: Complies with North American standards
Fluke FEV100/TY1 Specifications
|Input Voltage||UL1/N = 120 V, UL2/N = 120 V, UL1/L2 = 208 V, 60 Hz (three-phase system)
UL1/N = 120 V, UL2/N = 120 V, UL1/L2 = 240 V, 60 Hz (single-phase system)
±10 % voltage fluctuations from nominal 2
|EV connector (EVC-13)||SAE J1772 socket, 16 A (type 1, 5P single-phase)|
|Internal power consumption||2 W maximum|
|Temperature||Operating: -4 to 104°F (-20 to 40 °C)
Storage: -4 to 122°F (-20 to 50°C)
|Humidity||Operating range: 10 to 85% relative humidity non-condensing
Storage: 0 to 85% non-condensing
|Operating Altitude||6561’ (2000 m) maximum|
|Dimensions||8.66 x 4.33 x 1.77" (220 x 110 × 45 mm) without cable assembly|
|Weight||4.4 lbs (2 kg)|
Weight: 5 lbs.