AFL / Fujikura FSM-19S Fusion Splicer Kit
The FSM-19S Fusion Splicer is a lower cost solution than core-alignmet splicers, yet it still has high end robust features to increase efficiency and durability in the field.
The new FSM-19S Fusion Splicer (replaces the older FSM-18S Model) from AFL is a low cost, fixed V-groove, 2-axis cladding alignment, single fiber fusion splicer with the same robust features offered in other high end models. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and withstands a 30” drop test.
New user control features such as the automated wind protector expedites the slicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable "auto open sheath clamps" option, adds to your speed and efficiency by auto-opening one sheath clamp after the tensile test to prepare the spliced fiber for removal. Automatic clam-shell design, tube heater heats both sides of the splice protection sleeve resulting in even faster shrink times. In addition, user-selectable clamping method, automated monitor image orientation, and faster battery charge capability improve usability.
Ruggedness, durability and shock resistance are also greatly enhanced by the new mirror-less optical system and "severe impact resistant" monitor. AFL's included software provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.
Package includes: BTR-09 Li-Ion Battery and charger, CT30A Cleaver, AC Adapter, AC Cord, Spare Electrodes (pair), Sheath Clamp, USB Cable, Alcohol Dispenser, Screwdriver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap.
- Rugged mirror-less construction provides shock, dust and moisture resistance
- Dual monitor position with automatic image orientation
- Even better 5mm cleave length support for splice on connectors or small package needs
- Automatic arc calibration
- User-selectable fiber clamping method – sheath clamp or fiber holders
- Auto-start tube heater
- Impact-Resistant, Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
- Simultaneous battery charge and splicer operation
- Long life Li-Ion battery (up to 180 splice/heat cycles per charge)
- Detachable work table incorporated into the transit case
- Data and video download software included
- Internet software upgrades
- On-board training and support videos
- Green friendly – RoHS & WEEE compliant
|Model||FSM-19S Fusion Splicer|
|Applicable Fibers||Single-mode (ITU-T G.652 & G.657), multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)|
|Coating Diameter||100m to 1,000m|
|Fiber Cleave Length||5mm to 16mm|
|Typical Average Splice Loss||0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards|
|Splicing Time||11 seconds with standard single-mode fiber|
|Arc Calibration Method||Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available|
|Splicing Modes||100 preset and user programmable modes|
|Splice Loss Estimate||Estimate Based upon dual camera cladding axis alignment data|
|Storage of Splice Result||Last 2000 results to be stored in the internal memory|
|Fiber Display||X or Y, or both X and Y simultaneously; front or rear monitor display options with automated image orientation|
|Magnification||300X for single X or Y view, or 200X for X and Y view|
|Viewing Method||Dual cameras with 4.73 inch TFT color LCD monitor with anti-reflective coating|
|Operating Condition||0 to 3,660m above sea level, 0 to 95% RH, -10 to 50°C respectively|
|Mechanical Proof Test||1.96 to 2.25N|
|Tube Heater||Built-in tube heater with 30 heating modes; auto-start function|
|Tube Heating Time||17 seconds with FP-03 (40) sleeve, 5-16 seconds with Fujikura micro sleeves|
|Protection Sleeve Length||60mm, 40mm, micro|
|Splice/Heat Cycles with Battery||Typical 200 cycles with power save functions activated|
|Power Supply||Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-1, 14.8V DC with BTR-09 battery|
|Terminals||USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater|
|Wind Protection||Maximum wind velocity of 15m/s. (34 mph)|
|Dimensions||146 W x 159 D x 150 H (mm) / 5.75" W x 6.25" D x 5.9" H|
|Weight||2.3 kg (5.1 lbs) with AC adapter; 2.5kg (5.5 lbs) with BTR-09 battery|
Weight: 20 lbs.